

PRODUCT
Closure patch fix tape for heat shirnkable sleeve
CLOSURE PATCH
Fix tape for Heat shrinkable sleeve
Description
Closure patch is applied on the overlap of the heat-shrinkable sleeve for fixing and
sealing.
Construction: Two-layer system
Adhesive: High temperature, high lap shear strength.
Backing: Radiation cross-linked, high density polyethylene backing with glass fiber.
Application guide
1. Use hand roller to flat the surface of overlap sleeve. Make sure no bubble inside. Position the closure patch onto the edge of overlap of sleeve end. Make sure evenly on both side.
2. Lift one side of closure patch, heat the surface of a closure patch adhesive and the surface of overlap sleeve, ensuring the adhesive sufficiently melt. Press down by gloved hand and ensure the surface of a closure patch is flat. Then heat the other side of a closure by same way.
3. After the sleeve shrinking, the air bubbles under the closure patch should be quickly removed. Press the whole patch with the roller to ensure flat and pasted completely.
Recommended:
Paste attached two adhesive strips filler on both ends of closure patch, heat adhesive filler melting entirely. Flat melted filler surface by Spatula. Brash epoxy primer on two sides of closure patch, ensure completely seal the edge.
Standard ordering options |
|||
Cut piece |
Roll form |
||
Example: |
L500X150/1.8 |
Example |
RL-20x100/2.0 |
500 |
Length in mm |
RL-20 |
Length of roll in m |
150 |
Width in mm |
100 |
Width in mm |
1.8 |
Thickness in mm |
2.0 |
Thickness in mm |
Other width is available. Please note when place order |
Product properties |
||
Property |
Test Method |
Typical Value |
Backing |
||
Tensile strength |
ASTM D-638 |
20MPa |
Elongation |
ASTM D-638 |
500% |
Hardness, Shore D |
ASTM D-2240 |
52 |
Moisture absorption |
ASTM D-570 |
0.03% |
Adhesive |
||
Softening point |
ASTM E-28 |
>130°C |
Lap shear @23°C |
EN12068 |
4.8N/mm2 |
Peel strength to sleeve |
EN12068 |
6.0N/mm |
Storage Condition:
● To ensure maximum performance, store CHERAY POLYMER products in a dry, ventilated area and avoid exposure to direct sunlight, rain, snow, dust or other adverse environmental elements.
● Avoid prolonged storage at temperatures above 40°C or below -10°C.
Shelf Life: 2 years, under correct storage condition.
COMPANY
NEWS CENTER
Company News
Industry News
CONTACT US

E-mail : sales@cheray.com.cn
Web:www.cheray-polymer.com
Add:15 Mingyang Rd,Beiqiao Hope Industrial Zone,
Xiangcheng District ,Suzhou,Jiangsu,China

Copyright 2019 CHERAY POLYMER CO. Powered by www.300.cn SITE MAP 苏ICP备19050677号
Copyright 2019 CHERAY POLYMER CO.